Function is the best choice to replace traditional cables

The main function of BUSWAY is the configuration and transmission of power. Different from traditional cables, BUSWAY integrates four-phase feeders into a column with a minimum length and width of only 10*5cm. Compared with traditional cables, one Cable tray is at least 1 meter wide, making it The overall configuration space is only 30% of traditional Cable; In terms of convenience, for power transmission from point A to point B, if there is a demand for increased power consumption, traditional cables can only be re-wired from the main power panel and erected. The project is huge and the power outage construction time is long; BUSWAY only needs to add plug-in units, It can be installed and powered with live electricity; therefore, BUSWAY is more efficient than Cable in terms of space and convenience.

Conductor

Copper

Aluminum

Category

Cast Resin Busway

The safety regulations are high and applicable to general commercial buildings, residences, factories, and even harsh environments.

  • The overall temperature-resistant design can meet the temperature resistance of Class F (155℃)
  • Fire protection rating
  • CNS12514 840℃ 30mins
  • IEC60331 750℃ 3hrs
  • Flame resistance and self-extinguishing IEC60332
  • IP68 protection level (waterproof, dustproof)
  • IP68 protection level (waterproof, dustproof)
  • Earthquake level 0.8g [>0.4g=magnitude 7]
  • Explosion-proof level Exm∥ CNS3376 / IEC60079
  • Resistant to chemical corrosion
  • Capacity 400A ~ 6400A

CUL / IEC Busway

The shell is made of aluminum alloy, and the safety shell is grounded. It is light in weight, has good heat dissipation effect, and is easy to install.

  • The overall temperature-resistant design can meet the temperature resistance of Class B (130℃)
  • Fire protection rating
  • CNS12514 840℃ 30mins
  • IEC60331 750℃ 3hrs
  • Flame resistance and self-extinguishing IEC60332
  • IP66 protection level (waterproof, dustproof)
  • Earthquake level 0.8g [>0.4g=magnitude 7]
  • Capacity 600A-5000A

Data center Busway

The industry's only full-opening design allows plug-in units to be installed according to the position of the cabinet to achieve the shortest open line distance, making the overall computer room environment more tidy, allowing high cabinet setting flexibility and maximizing space utilization.

  • The overall temperature-resistant design can meet the temperature resistance of Class F (155℃)
  • IP20 protection level (waterproof, dustproof)
  • Earthquake level 0.8g [>0.4g=magnitude 7]
  • Collision protection level IK10
  • Capacity 250A ~ 2000A

BUSWAY System

Connector

   Description  Advantages  Disadvantages
 Molded connector  Epoxy resin sealing and pouring is carried out at the construction site. After the molding is completed, the safety specifications of the joint position can reach IP68, explosion-proof, fire-proof and flame-resistant.  The joint has high reliability and is suitable for use in cases with harsh operating environments.  If changes are required, the joints need to be damaged, and the damage construction (power outage) will take a long time.
 Bridge connector  The double-bolt joint design ensures a large copper plate contact area and uniform compressive stress distribution at the joint, providing a more reliable connection between the two busbars.The joint can reach IP65; special patent can reach IP68  High installation flexibility and short construction power outage time

PIU

  • With the PIU design, when users add new equipment or adjust the power load, they only need to purchase the required plug-in unit specification components, and the PIU can be installed in the most appropriate position without power interruption. The power is drawn out from the bus jack, which provides considerable flexibility and flexibility in use, and is quick and easy to install.
  • The TBC plug-in unit has two different designs, both of which can be plugged and unplugged with live electricity：
  • Plug-in type capacity is below 630A, conductive clip contact structure design, suitable for low load systems. 
  • Bolt-on tpye capacity is below 2000A, bolt bridge contact structure design, suitable for high load systems, using bolts for extremely high reliability.
  • The standard for the insertion section busbar is 2.4M, and up to 5 insertion holes can be reserved. The location and number of insertion holes can also be designed according to customer needs. In addition to reducing costs, it also reduces unnecessary waste.
  • The MCCB used in the plug-in unit can be matched with any brand, and can be customized according to customer needs.
f you want to know more about the power bus, call  (02)2298-2566immediately and a professional team will serve you!
 
back